The Smart Card Simulator
by
Wolfgang Rankl

Version: 0.9.2, September 24, 1996

Copyright 1996 by Wolfgang Rankl, Munich


The Smart Card Simulator is a program for Windows 3.1 / 95 to simulate a terminal and a smart card. 
With this software you can see "into" the smart card, create files, send commands and receive 
it from the smart card. 

To make you the life as easy as possible and use in addition to the "official" name as 
ICC ("ISO-slang" for integrated chip card) for the more common words like smart card.

The Smart Card Simulator offers you a wide variety of possibilities to learn and work 
with a smart card.

Purpose:
The intention of this software is to give interested persons the possibility to work and 
learn with smart cards. Neither a smart card or a smart card terminal is needed. You have 
only to install the software on your PC and can start work with smart cards. There are also 
some demonstration applications, so you can start working immediately after installing. If you 
have designed your application you can contact a smart card manufacturer and ask for real 
smart cards. I implemented only standardised smart card commands so that this should be 
possible in most of the cases.

You can use this program it for learning, working teaching and it will grow with you.

Hardware:
You need a PC, which runs under Windows 3.1 or Windows 95. Use Windows 95 for best results.
The graphic adapter must support at least 16 colours and a resolution of 640*480 which 
means VGA. The program could be used on a VGA 640*480*16 graphic display, but I recommend 
to use a display with a resolution of 800*600 or higher, because it is much easier to work 
with the simulation. I tried the software on a 386/25 MHz PC with 8 Mbytes and it works, 
but very slow. I suggest to use PC with 486 processor or higher.

Software:
Windows 3.1 or Windows 95 (prefered).
The Smart Card Simulator needs 4,7 Mbyte space on your hard disk.

Files for the Smart Card Simulator:
README.TXT	Information’s about TSCS as ASCII text (this file)
SETUP.EXE	Run this to install TSCS
HELPTXT.RTF	Help Text for Non Windows 95 User

COMDLG16.OC_
COMPOBJ.DL_
CTL3DV2.DL_
GAUGE16.OC_
GRID16.OC_
HELP.HL_
README.TX_
HELPTXT.RT_
MSCOMM16.OC_
MSOUTL16.OC_
OC25.DL_
OC25DEU.DL_
OLE2.DL_
OLE2.RE_
OLE2CONV.DL_
OLE2DISP.DL_
OLE2NLS.DL_
OLE2PROX.DL_
SCP.DL_
SETUP.LST
SETUP1.EX_
STDOLE.TL_
STKIT416.DL_
STORAGE.DL_
TABCTL16.OC_
THREED16.OC_
TSCS.EX_
TYPELIB.DL_
VAEN21.OL_
VB40016.DL_
VB4DE16.DL_
VSHARE.38_

Disclaimer of Warranty:
If using this software, you understand and agree that this software is provided "as it is" 
without warranty of any kind. The entire risk as to the results and performance of using 
this software lies entirely with you, the user. The author does not make any warranties, 
either expressed or implied, including but not limited to implied warranties of 
merchantability and fitness for a particular purpose, with respect to this software.  
This application has been extensively tested and should do no damage, but if it does then 
you will be on your own. Use at your own risk. 
If you can not agree with this, don’t use the software.

Trademarks:
Windows, Windows 95 are trademarks of Microsoft.
Pentium is a trademark of Intel.
All other trademarks are property of their respective holders.